Garage Door BreaksA garage door is a significant investment for many homeowners. It protects your car and house from the elements, as well as provides privacy to those inside. However, we’ve all been there when you’re rushing out the door when you realize that your garage door isn’t working correctly. No matter how hard you press the button, nothing happens, and it’s up to you to figure out what’s wrong. One wrong move could cost you time or money, but people make several common mistakes when their garage doors stop working.

Here are the top 10 things that could go wrong if your garage door breaks down.

#1 Conked Out Batteries

Batteries are what keep these gadgets going; without them being charged regularly or replaced after a long period without use, any of our devices won’t work as intended!

First, check your garage door transmitters to see if they are still working by pressing down on them. If one does work, you will need a new battery for that particular unit, but in most cases, it’ll be an easy fix with some replacement parts and fluids.

Then, trying to change the battery on your garage door transmitter is a simple task. Most will require you to open it by sliding out from behind, while others come with screws and can be unscrewed for easier access to change or secure batteries more securely!

Once the old batteries are out, make sure to install the new ones with both plus and minus signs lining up with their counterparts on the inside of your transmitter. If they don’t match up, then there’s no point in putting this new one in because it will just end up giving you false positives. Once everything has been aligned correctly. If it still doesn’t work, you might need to replace your opener itself because the problem probably has nothing to do with its batteries after all!

#2 The Photoelectric Sensor Gets Out Of Position

Garage doors have a new safety feature that can detect if something is in its path before closing. A photo eye on either side of the garage entrance sends out an invisible beam. These days we all know what happens when you aren’t careful. This was invented to prevent automatic doors from doing us wrong by being closed onto someone or something causing severe injury!

Your garage door may be opening and closing usually, but if you notice that it doesn’t attempt to close when the remote is pressed, then go ahead with your inspections. First of all, visually inspect the photo eyes; over time, these can get dirty or misaligned, which would affect how well light penetrates through them, so they don’t match up on both sides.

The photo-eyes should be aligned with each other and at a similar angle. If they’re not, the door will stay open because it thinks something is in its path. This can happen for many reasons, so make sure you check both alignments and whether there’s any debris or dirt on top of them before closing up shop! You’ll need to measure from eye height.

If you’re still experiencing issues with your door after following the steps above, it may be time to call in professionals.

#3 The Roller Track Is Not Perfectly Aligned

A misaligned garage door can be a severe issue. The metal track your door runs on needs to be appropriately aligned for its moves, and if you see gaps between rollers or bends in rail, there might have been some issues with this before the alignment was checked upon. Heavyweights from opening & closing often compound these problems until they become dangerous. So, don’t operate any heavier than what is safe!

In case you notice that the garage door is misaligned, but it still moves smoothly when opening and closing, then there are some things to try on your own. If a rubbing noise can be heard at specific points between each pull of the cord or if speed becomes slower as soon as they hit this spot, know that all possible repairs have been made with one goal.

When the track is misaligned, first loosen the screws that hold it in place. Gently tap and move back into proper position with a rubber mallet until you get an accurate alignment by using levels on both sides of the garage door opening, so there are no more issues when operating this mechanism!

To realign your wooden roller-type overhead garage doors’ tracks, unlock all fasteners located. Please do the same with each side frame next to eye bolts where connecting hardware must be attached before giving them about half an inch or less of lateral play and then fasten them back down.

Once everything’s reattached, test the door and look for any remaining misalignment by keeping a straight edge against the sides of the track. If it’s still no good, then you’ll have to call in professional help from a garage door specialist!

#4 Blockage In Rim Of The Door

When a garage door closes, it can be stopped by an object on the ground that gets in its way. This could include things like garbage cans or toys and may also happen because of debris buildup preventing them from moving forward. This includes small items such as rocks, gum mud leftover from rainstorms. This accumulates until there is too much pressure pushing against one side due to friction between these materials scraping together at different speeds, creating sparks when they collide. 

For smooth functioning of the garage, door tracks should be inspected for any blocking or buildup. If you see anything preventing smooth functioning, it may need to go back into service with a professional technician and hardware kit so they can take care of the issue quickly before things get worse! Make sure track cleaning tools are accessible nearby since this type of situation requires more attention than usual. Maintenance would usually be required because when dirt particles build up on top surfaces over time, these become slippery. This causes doors not to fully close anymore, making opening them difficult, sometimes even dangerous if someone tries pulling too hard in the opposite direction without knowing what’s going wrong. Make sure that the garage door is appropriately aligned and well-maintained to avoid any potentially dangerous pitfalls!

#5 Open & Close Limit Settings Are Inaccurate

Garage doors are designed for safety, so it’s essential to know how they work. When your garage door closes and then immediately goes back up again instead of staying in the closed position, this could be because there is an issue with its open & close limit settings on the opener. Sometimes it can get bumped out of place, and if this happens, do not try to force the door down manually because you could cause damage. It’s vital to call a professional garage door technician immediately in times like these if the door is pushed up and held there by hand. At the same time, they come and inspect settings and diagnose what’s happening. It could be that this situation might even put someone’s life at risk by trapping them between the door and the frame.

#6 The Garage Door May Have Been Manually Locked

There are a few things that may cause your garage door not to open. One of them is if the opener motor runs for just seconds and then shuts off, meaning there’s something wrong with it or you don’t have power at home (very rare). The lock could also be engaged by accident when someone was trying to manually unlock an already unlocked door before moving into their new place!

The manual locks on your garage door make it extra safe, especially if you have an older model. To engage the lock. You’ll need to slide two bars from each side across, and pressing a button at the top or side of the handle will do this job for you! As long as someone doesn’t get too close with big objects in tow (and presses buttons by accident), anyone should enter without breaking any glass inside their house!

You can manually unlock your garage door by turning the handle and listening to clicking sounds. This will move horizontal bars away from edges, securing it in an open position with no locks needed! This method must be done gently, or else you could damage rollers or tracks with your efforts.

#7 There Is An Issue With The Transmitter.

The most common reason for a transmitter not working is that you are out of range. You’ll need to ensure your garage door and the device it’s paired with have enough power by either getting closer or setting up an extender. Still, even then, there can be issues if one party changes their settings on themself without telling another.

When your remote doesn’t work, the first thing to do is make sure it’s not stuck under something that could be pressing on the button. For example, if you had fallen asleep with your transmitter and then woke up with a weight rolling around in front of where it’s resting (such as by sitting on top). This would likely cause an issue due to mechanical stress placed upon one side precisely, leading to permanent damage! Next, It is recommended to check whether there might be some interference-maybe neighbor kids were playing outside without realizing they set off our transmission frequency at any point during their entertainment session? If neither situation applies, we’ll pretend like the kids didn’t do it and conclude that the remote is probably going bad. If you’ve tried and tested all these steps, but none have worked for your garage door remote yet, you may need an upgraded transmitter.

#8 Broken Or Faulty Springs

If your garage door is giving you trouble, it could be the torsion springs. A loud bang will happen when they snap from tension and deploy into action, sending that heavy-duty lifter up to open or close for all cars passing through!

If you’re having other similar problems with your garage door opener, it may be the extension springs that are generally used to avoid an issue of “too much tension.” This can be easily fixed by our certified technicians-just remember that when both these components need replacement, they should always be replaced together to prevent future issues!

If the garage door is properly lubricated but still seems to be making too much noise even when it’s closed, this could be due to worn rollers. The best way for them to be replaced is by enlisting the help of the experts because they know what type of model you have and can ensure that the parts you receive are compatible.

#9 The Disconnect Switch Has Been Turned On.

A disconnect switch is a safety feature that will allow you to open and close your garage door manually. If the power goes out, this can be used as an emergency fix for getting back inside without waiting around with a car stuck outside!

In case the garage door motor is running, but you can’t hear it. This could be because the disconnect switch has been enabled. Every opener comes with one, and if your power goes out or gets disconnected from outside sources for some reason, then this will allow manual operation so that the car won’t get stuck inside until things calm down!

The easiest way to know if this has been enabled is by seeing a green light by the button. If it’s on, then that means the switch needs to be turned off for power to come back. Remember where you put that code word or key!

If your door isn’t staying in the up position, the limit stops need to be adjusted. These are the two screws on top of the garage door tracks used to keep your door from coming down too far if entered past one of its sensors. Though, you can use this function as another way to make sure no pets or children get caught under the door unexpectedly!

#10 The Broken Cable Or Tension Spring

If you have a garage door, one thing can typically cause it to close too quickly and with an associated bang. This is when the tension springs or cables break on your doors—which often happens due in part to their age! If this occurs during closing time, think ahead about how dangerous a situation might arise if someone were underneath them at just such a moment; they may not be able to stop themselves before being crushed by overhead momentum. You should call professionals immediately, so these problems get resolved as soon as possible.

If the springs break, the door may suddenly go off track, leaving it unable to open or close. There are typically two tension springs on each side of the garage door, which apply force so that the mechanical parts can continue moving in unison toward their next steps for opening and closing to take place. If one has snapped, this will require replacing the door to be fixed and continue working usually!

If the cable breaks or is misaligned, this will typically stop the garage from either opening or closing altogether. The cables are located behind your springs, and alongside your garage door, tracks-and can go a long time without being checked if you don’t have a routine maintenance schedule. If this has happened, then you should call your garage door supplier.

Garage Door Repair Pittsburgh

When you need to get your garage door repaired, turn to Spartan Garage Doors. Our team handles all the details so that you can focus on what matters most—getting back in your home. We know how important it is that our work is done quickly and with great care and attention to detail. You’ll find this commitment at every step of the process when we repair or replace a broken section of your garage door. So call us today for reliable service!

Leave a Reply

Your email address will not be published. Required fields are marked *